CD-710
The CD-710 Cable Fault Detector is a portable system for easy identification of opens or shorts in exposed cable runs.
TRANSMITTER
- Input power – 110 VAC
- Output frequency – 1.2 Khz
- Controls – phase select, test mode, & off-on
DETECTOR
- Display – sequential LED
- Controls – sensitivity, short switch and open switch
- Saves replacement cable.
- Pinpoints problem in minutes without replacing or further damaging the cable.
- Find opens and shorts in AC & DC trailing cable.
- Fault indicator light on transmitter identifies faulted wire eliminating a need for a volt-ohm meter.
- Transmitter output protected, harmless to operator.
- Color-coded alligator clips enable quick connection to cable plug when fault occurs.
- LED indicators on detector for better visibility underground.
- A mounting bracket is located on the side of the transmitter for detector storage.
- The detector can be locked to the transmitter.
- 18 gauge stainless steel enclosure.
- Finds opens above 350 ohms, shorts below 1000 ohms, without ground monitor filter installed at load end.
- Finds opens above 1500 ohms, shorts below 350 ohms, with ground monitor filter installed at load end.
| Enclosure Dimensions: | 11-3/4″L x 6-1/4″W x 3-3/8″H (298.45 mm x 158.75 x 85.73) |
| Enclosure Type: | 18 gauge Stainless Steel |
| Unit Weight: | 7 lbs (3.18 kg) |
| Operating Voltage: | 120 VAC |
| Backup Battery: | No |
| Max Output Current: | 300 mA RMS |
| Max Output Voltage: | 8.5 VAC |
| Operating Temperature: | -10 to 60 C |
| Outputs: | 3 Conductor leads, 1 Ground lead, 1 Pilot Wire lead |
| Output Frequency: | 1.2 Khz (+/-2%) |
| Display: | LED Indicators |
| Self Test Feature: | Yes |
| Warranty: | 180 Days |
| Enclosure Dimensions: | 4-3/4″L x 2-5/8″ W x 2-1/4″ D (120.65 mm x 66.68 x 57.15) |
| Enclosure Type: | Molded ABS plastic with 18 gauge Stainless Steel |
| Unit Weight: | 16 oz. (453.59 g) |
| Operating Voltage: | 9 VDC Battery |
| Max Output Current: | 50 mA |
| Max Output Voltage: | 2.5 VDC |
| Operating Temperature: | -10 to 60 C |
| Output Frequency: | 1.2 Khz (+/-2%) |
| Display: | LED Indicators |