Since 1987, AMR PEMCO has provided the most flexible and reliable mine monitoring systems available in the mining industry.  Our systems optimize operations through real-time monitoring and control, allowing an operator to pinpoint unsafe or hazardous areas, trend machinery data for maintenance, and control devices remotely.  Mine operators can choose the standard MC-4000 System, which communicates over simple and durable twisted pair copper cable and uses RS-485 protocol; or select the MC-4000-ET System, which utilizes Modbus over Ethernet protocol on a fiber-optic backbone.

AMR PEMCO offers several options for monitoring software as your Human-Machine-Interface (“HMI”) for either system including AMR’s WinMAC Software and Graphics Package, or off-the-shelf suites from Rockwell, Inductive Automation, Wonderware, GE, Citect and more.  In addition, AMR PEMCO’s MC-4000 product line includes a complete line of field-proven sensors, remote I/O devices, repeaters and troubleshooting devices. Collectively, the MC-4000 line delivers the ultimate in safety and productivity improvements to your operations.

TS-7500 Track Switch

The MC-6410 Multi-Gas Monitor is a self-contained atmospheric monitoring solution in a rugged, NEMA 4X polycarbonate enclosure. Capable of monitoring multiple gas types simultaneously in dozens of unique configurations, the sensors operate at low current for increased...

MC-4000-ET

As technology changes in the mining industry, AMR PEMCO strives to satisfy the needs of the growing industry. Our new Ethernet-based Mine Wide Monitoring System applies the latest in technology available today. Utilizing a fiber-optic backbone and our Modbus Gateway...

MC-4011

The MC-4011 Data Line Interface is a stand-alone RS-232 to line converter with an integral power supply for trunk line sensors. It connects to the serial port or USB of the MC-4010 Master Station and then drives the system’s data line. 28 VDC power supply...

MC-4020

A multichannel, battery-backed, 120 VAC powered remote station provides DC power for specialized sensors and enough I/O points for most applications. For example, the unit could monitor vibration, phase loss, water gauge, motor current, bearing temperature, etc....

MC-4025

This small, addressable, line-powered remote station can be attached anywhere on the MC-4000 data line to monitor, belt functions such as slip, gob, remote switch, etc. Relay outputs can be used to control belts and pumps.

MC-4040

The MC-4040 is used to split and extend the MC-4000 data line. This unit can be line-powered just as the MC-4210 addressable sensors are, or it can be integrated into a MC-4020 remote. The MC-4040 also has two on-board analog channels and two control outputs for...

WinMAC

WinMAC is a fully featured monitoring and control application developed for the Windows® environment.   Monitor multiple unique gases simultaneously Sensors available include: CO, CO2, CH4, O2, NO, NO2, H2, H2S, SO2 and others Diesel Nullifying available...

MC-6410 MULTI GAS MONITOR

The MC-6410 Multi-Gas Monitor is a self-contained atmospheric monitoring solution in a rugged, NEMA 4X polycarbonate enclosure. Capable of monitoring multiple gas types simultaneously in dozens of unique configurations, the sensors operate at low current for increased...

MC-6415 SMOKE SENSOR

AMR PEMCO’s Patented MC-6415 Wireless Smoke Sensor provides monitoring for smoke and/or fire conditions in key locations.  The sensor has the capability of wireless communications such as AMR’s Mine Net™ Mesh Wi-Fi system or wired communications such as Modbus or...

MC-4210 SINGLE GAS MONITORS

Line-powered gas monitors, addressable up to 256 on each sub network. One compact surface mount PC board for sensor and communicationsWide range four-digit displayCalibrated without removing coverNon-intrusive sensor test and calibration with automatic...

MC-4210-CO/NO

Designed to significantly reduce the nuisance alarms associated with using diesel equipment in coal mines. In addition to emitting carbon monoxide (CO), the diesel engine also emits nitric oxide (NO) in a CO/NO ratio of approximately 4:1. Using two gas sensing cells,...

MC-4210-CH4-IR (Infrared)

The MC-4210-CH4-IR Addressable Sensor is a compact monitor designed to be used with our MC-4000 System. The MC-4210-CH4-IR offers a very low current draw and is easily addressable by using three rotary switches. Units can be configured for multiple communications...

MC-4231-CO

Data line connected CO monitor with high visibility LED and audible alarm. One compact surface mount PC board for sensor and communications Wide range four-digit display Calibrated without removing cover Non-intrusive sensor test and calibration with...

BC-Pro Conveyor Belt Controller

A “stand-alone” unit to monitor and control the many functions at the belt head, the BC-Pro Conveyor Belt Controller is designed to oversee any area involving the transfer of materials in a mining, tunneling, quarrying or processing operation. Through the continuous...

Head Office

PO Box 234
12187 N Scenic Highway
Rocky Gap, VA 24366

T:  +1-800-541-5583
P:
  +1-276-928-1712
F:  +1-276-928-1815

Hours of operation:
Monday - Friday
8:00AM - 4:30PM EST

Bluefield Facility

1960 Valley Dale Street
Bluefield, VA 24605-9454

GPS > 700 Fincastle Tnpk

T:  +1-800-428-7800
P:  +1-276-326-2611

Hours of operation:
Monday - Friday
8:00AM - 5:00PM EST

After Hours, Weekend & Holiday Service

+1 866-456-0231 (Toll Free)
* A technician will respond by phone within four hours of receiving your call.